Ford Ranger T6 4th Gen Extended Cab (2012-2022) Front Runner Slimline II Low Profile Roof Rack Kit

Low Profile Roof Rack Kit by Front Runner for Ford Ranger T6 4th Gen Extended Cab

This 954mm/37.6†long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen Extended Cab (2012-2022). Drilling is required for installation.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*

For further information on installation, please see the fitment instructions in the INSTALL tab. Note: Some side mount accessories are not suited for low profile foot rails such as JADA010 and RRAC103.

Product Specifications:

• Part Number: KRFR016T
• Consisting of:

• 1x FAFR009 - Ford Ranger T6 4Gen ExCab(2012-Curr)Foot Rails/Low
• 1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)
• Material Used: Black epoxy powder-coated T6 aluminium, High strength steel
• Approximate Installed Weight: 20.69kg (45.61lbs)
• The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
• To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot.
• If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
• If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicle's roof.
• Shipping Dimensions: Width: 440mm (17'') Length: 1730mm (68'') Height: 165mm (6'')
• Shipping Weight: Weight: 21kg (46lbs)

FAQs:

• Q: Is this kit suitable for other Ford Ranger models?
  A: No, this kit is specifically designed for the Ford Ranger T6 4th Gen Extended Cab (2012-2022) models only.
• Q: Can I install this kit myself or do I need professional help?
  A: Drilling is required for installation, so while the kit includes instructions, professional installation is recommended.
• Q: What accessories are compatible with this roof rack kit?
  A: This kit is compatible with most Front Runner accessories for trucks, excluding certain side mount accessories as noted. You can view compatible accessories in the same category.
• Q: Is a wind deflector included in the kit?
  A: Yes, a Wind Deflector is included as part of this Slimline II Roof Rack Kit.

If you require professional installation or fitting, we (Leighton Vans) offer this service and you can contact us for more information.